Ball head pin quenching equipment
Main parameters
|
Rated power |
120KW |
|
Input voltage |
3 phase 380V/50-60Hz |
|
Frequency |
10-15KHz |
|
Max. input current |
180A |
|
cooling water pressure |
≥0.03MPa |
|
Water inlet temperature |
<45℃ |
|
flow rate of cooling water |
≥6L/min |
|
Duty cycle |
100% |
|
Size |
620*500*1600mm |
|
Weight |
138KG |
Automobile steering system is used to control the driving direction of automobile, which is composed of two parts: steering machine and steering coupling mechanism. The up-and-down swing arm ball pin assembly is an important force transmission mechanism in the whole linkage mechanism, located in the swing arm assembly and wheel steering knuckle connection, in the front of the whole car suspension system, transfer torque and torque, at the same time in the bumpy road by instantaneous impact load, and the ball pin seat to bear all the force, and the assembly with the steering knuckle and swing arm fixed. Therefore, it is necessary to adopt high-frequency surface quenching treatment process, in order to meet the wear resistance, corrosion and improve the service life of the product.
IGBT inverter technology and series resonant circuit;
Phase lock technology and soft opening technology ensure high reliability, realize automatic frequency tracking;
Power factor is not less than 0.95;
100% load persistence design, can work continuously, can be started or shut down immediately;
Environmental protection, clean, pollution-free;
Low energy consumption, the conversion efficiency is more than 97.5%, compared with SCR medium frequency induction heating equipment energy saving 10%-30%;
Instead of oxygen rejuvenation flame, coke furnace, salt bath furnace, gas furnace, oil furnace and other traditional heating methods.
