Turning tool high frequency brazing equipment
1 Main parameters
|
Rated power |
30KW |
|
Input voltage |
3 phase 380V/50-60Hz |
|
Frequency |
15-25KHz |
|
Max. input current |
45A |
|
cooling water pressure |
≥0.03MPa |
|
Water inlet temperature |
<45℃ |
|
flow rate of cooling water |
≥6L/min |
|
Duty cycle |
100% |
|
Size |
600*300*550mm |
|
Weight |
35KG |
2 Main characteristics of turning tool brazing
The machine takes IGBT as the main component, the power circuit takes series oscillation as the basic feature, the control circuit takes frequency automatic tracking and multi-closed-loop control as the main feature.
The equipment is highly integrated and modular.
High efficiency, stable performance, safe and reliable.
3 High frequency brazing equipment is a kind of induction heating equipment which can connect two kinds of metal of the same material or different material by heating the welding material to a certain temperature and melting the solder.
Brazing process of high-frequency brazing equipment: the workpiece with clean surface is assembled together in lap type, and the filler metal is placed near or between the joint gaps.
When the workpiece and the filler metal are heated to slightly higher than the melting point temperature of the filler metal, the filler metal melts (the workpiece is not melted), and by capillary action is sucked and filled with solid between the workpiece gap, the liquid filler metal and the workpiece metal mutual diffusion dissolution, cold doubt is formed after the brazing joint.
4 Welding equipment is mainly used in
Welding of all kinds of diamond composite bit
Welding of various carbide cutting heads and saw blades
All kinds of cutting teeth, bit, drill pipe, coal bit, air drill and so on
High-frequency induction heating equipment allows the operator to observe the brazing process, which is difficult to achieve with flame welding.
The controllability of induction heating and precise heat transfer greatly reduce the risk of overheating and thus avoid weak joints
Induction heating is controllable and repeatable. Input the process parameters you want in your induction heating, and it will repeat and cycle work with minimal error.
